APO TMV20S 20mm High Performance Solar Tempering Mix Valve

APO TMV20S 20mm High Performance Solar Tempering Mix ValveOverview APO TMV20S solar rated high performance tempering mix valve has BSP 20mm 3 4" compression fittings at all three ends and features copper olives. Australian Watermark approved. The APO tempering valve is compatible and direct swap for most mainstream tempering valve brands such as AVG, AW, Reliance, Tomson and Nefa with same functions, fitment and similar physical size. The APO TMV20S tempering valve can automatically mix the cold and hot

Overview

APO TMV20S solar rated high performance tempering mix valve has BSP 20mm 3/4" compression fittings at all three ends and features copper olives. Australian Watermark approved. The APO tempering valve is compatible and direct swap for most mainstream tempering valve brands such as AVG, AW, Reliance, Tomson and Nefa with same functions, fitment and similar physical size. 

The APO TMV20S tempering valve can automatically mix the cold and hot water inputs and output a steady 50 deg hot water after mixing. The tempering valve is required in Australia by law in the plumbing rules as it is a safety device. Without mixing, the hot water straight from the hot water services can exceed 70 deg and can cause severe instant burns when in contact with skin. 50 deg feels hot, yet without the dangers of burning. When required, the output temperature of the APO TMV20S tempering valve can be adjusted between 35-55 deg.

Being a solar rated and high performance variant, the APO TMV20S tempering valve can be used in solar hot water heaters and instantaneous gas water heaters where the hot inlet temperature can be very high up to 99 degrees. In these applications, a standard tempering valve cannot handle the high incoming temperature at the hot inlet.

Technical Details

• Brand: APO
• Model: TMVS20S
• Watermark License Number: WMK26648
• Thread Size: 3/4" (20mm) BSP Compression with Copper Olives (20C x 20C x 20C)
• Physical Thread Measurement: 26.441mm internal/external thread diameter (Refer to the BSP sizing chart in the photo gallery) 
• Material: DR Brass Body and stainless steel filter mesh
• Maximum Hot Water Supply Temperature: 99 deg
• Adjustable Outlet Temperature: 35-55 deg
• Set Temperature: 50 deg Standard
• Accuracy of Outlet Temperature: +3 deg (Tested as per AS4032.2)
• Minimum Temperature Differential: 15 deg
• Maximum Working Pressure: 1600Kpa (Static) and 500Kpa (Dynamic)
• Minimum Flow Rate: 4L/Min
• Features: Loose nuts to allow easy removal of the hot and cold inlets ends for servicing and cleaning
• Intended Use: Solar Hot Water Heater, Instantaneous Gas, Heat Pump, Standard Hot Water Heater and Storage Gas Water Heater
• SKU: APO-TMV20S

Package Contents

• APO TMV20S Tempering Valve With Insulation
• Package Weight: 840g