Reinforcement plate BMW 3 E36 Rear subframe mount
SKU: 36963520927

Reinforcement plate BMW 3 E36 Rear subframe mount

$42.75 $47.50
Save 10%
No.2 Bestseller on catchdrive.co >

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 7 - Jul 12

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Reinforcement plate BMW 3 E36 Rear subframe mountThe reinforcement of the rear subframe mounting for the BMW E36 has been developed by RS Ultimate, with precise fitting to the original mounting points and floor indentations in mind. The reinforcement elements can be welded without additional modifications to the chassis or the rear subframe itself. They feature numerous and varied bends and a large contact surface, allowing them to handle much higher loads. The stiffeners have 4 additional "leaves"

The reinforcement of the rear subframe mounting for the BMW E36 has been developed by RS-Ultimate, with precise fitting to the original mounting points and floor indentations in mind.

The reinforcement elements can be welded without additional modifications to the chassis or the rear subframe itself. They feature numerous and varied bends and a large contact surface, allowing them to handle much higher loads. The stiffeners have 4 additional "leaves" that must be shaped on the semicircular part of the original floor indentation in the BMW E36, after preliminary welding. Their unique shape allows for precise fitting to the contour of the indentation, and the gaps formed after bending allow for a perfect weld between the stiffeners and the floor.

The elements feature numerous perforations, which allow, among other things, for connecting to the basic welding points of the chassis components.

This product is intended for cars that, due to the passage of time, require the repair or reconstruction of the original mounting. Additionally, the reinforcement is also used for tuning purposes to prevent damage during intense use in motorsport or during events such as Drift, KJS, 1/4 mile, Time Attack, etc.

The elements are manufactured using numerical CNC machines, ensuring the highest quality and repeatability of production. Additionally, they are protected with anti-corrosion wax.

Manufacturer: RS-Ultimate

  • S355 steel, 3 mm thickness
  • For welding
  • Mounting side: right/left

The set includes:

  • 4 pieces of reinforcement elements for the BMW E36 subframe mounting
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 36963520927

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.6 ★★★★★
Based on 569 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
M
Verified Purchase
Movie Buff
Whiting, US
★★★★★ 5
It takes skill to mount and not have the leaning tower of Pisa
Size: 36in, Color: 4-layer
First, the product is beautiful! I purchased this one for a smaller wall location but realized it was more massive and commanding within a room - That ended up being a good thing as I decided to put it in my office where my L shaped desk, (a Vernal executive desk), being quite massive, was successfully offset by drawing the eye up to the wall behind the desk where I had this mounted - In essence, the room was now properly balanced with the large desk - One should also know it takes some skill to mount to the wall - It should be in studs - You have to use a balance or bubble level to first get the vertical pipes parallel to each other - Also, make sure both vertical pipe supports are symmetrically matching each other from one side to the other - If you mount one upside down the wood shelves won’t lay level - We also turned the pipe supports so that the shelves would be equal distant - If I recall, if they are turned the other direction , you end up with shelves that are not equal distant with 2 shelves ending up closer to each other than the remaining shelves. The shelving is very high quality and I was very, very pleased with the end result and how the whole room was balanced with the large desk in a smaller office space.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 22, 2026
T
Verified Purchase
That One Guy
Draper, US
★★★★★ 5
Solid shelves that look good!
Size: 36in, Color: 3-layer, Size: 36in, Color: 3-layer
Got these as a focal piece to my basement bar (added some cheap stick on LED strip lights behind it). I’m glad I ordered these! They are sturdy, shelves are solid wood, and the overall quality of the shelves is great. They were easy to install with provided hardware (although there isn’t much instruction in terms of mounting them, just putting them together), but it was simple enough to figure out with two people and a level (one holding, one making marks). Each pipe end has 4 screw holes, so expect to put 16 holes in your wall, but as shown in the photos the shelves can hold a good amount of weight. I recommend these for anyone looking to add the industrial look to your wall with a quality built shelf.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 7, 2023
D
Verified Purchase
david nespoli
Dallas, US
★★★★★ 5
VERY sturdy and almost foolproof
Size: 36in, Color: 3-layer, Size: 36in, Color: 3-layer
This kit is made of real wooden planks, and metal pipes and fittings. Installation is simple- assemble each end of the kit, hold it up to the wall using a magnetic level, mark the four holes for each mounting piece, then repeat with the other side. You'll need a tape measure to make sure that the ends aren't too close together or too far apart, and measure from the ceiling or floor to ensure a level surface. You will want a second set of hands for most of the install process. This kit comes with good molly bolts and strong screws that match the finish of the metal hardware. Make sure that each side of the unit is oriented the same way, as I had to flip one side after neglecting to do so at first. Retaining brackets and wood screws are included for securing each shelf to the metal frame. A power drill makes this part very easy, and can be done mostly solo as the brackets can be pinched to clip onto the frame while you attach the screws. Once installed, this unit is VERY sturdy. There is no play or wobbling when testing the attachment to the wall. If there is, tighten your screws and make sure that the fittings to the wall mounts are hand-tight. These shelves can handle heavy kitchen staples and books with no problem. It is a tier more expensive than most Ikea-style shelving, but that's worth it for the confidence that my dry goods are safely stored in a convenient place.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 10, 2023
D
Verified Purchase
David H
San Leandro, US
★★★★★ 4
Great shelving unit
Size: 48in, Color: 4-layer
Great looking shelving unit.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 6, 2026
R
Verified Purchase
r atienza
Dallas, US
★★★★★ 5
Nice Product
Size: 48in, Color: 4-layer
The TP-Link Omada 5-Port Gigabit Easy Managed Switch offers stable performance and straightforward setup. It delivers consistent connectivity and solid value for the price. A dependable choice for a well-organized network.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 21, 2026

recommand products

Mishimoto Oil Cooler Kit Honda S2000 2000-2009
351.02
Numbuzin No.5 Daily Multi-Vitamin Cream
55.53
SPERRY Womens Crest Vibe Sneaker
11.94
Mishimoto Performance Radiator Subaru WRX/STI 2001-2007
192.05
Core 8x8 Instant Sport Shade Dark
109.99